- ページ 21

ドライヤー Miele Novotronic T 220のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Miele Novotronic T 220 44 ページ。 Novotronic vented tumble dryer
Miele Novotronic T 220 にも：取扱説明書 (44 ページ)

ページを印刷する

Problem

The drying

process goes on

too long or even

switches off.

Possible cause

Important: Before attempting to remedy one of the following

causes, switch the dryer off and switch on again to start the

programme again.

Ventilation to the dryer is

insufficient (e.g. because it

is installed in a room which

is too small).

The fluff filter may be

blocked.

The vent ducting or the

ventilation outlet is blocked.

The laundry has not been

spun sufficiently.

The tumble dryer has been

overloaded.

Metallic components, e.g.

zips have prevented the

dryer from registering the

correct moisture level in the

laundry.

Problem solving guide

Remedy

Open a door or window while

the machine is in operation for

increased air flow.

Remove any fluff.

– Check all parts of the

extraction system on a

regular basis (e.g. wall vent,

external grille, bends in the

ducting etc.) and make sure

they are all free of any

hindrance.

– Remove any fluff.

Make sure that your laundry is

thoroughly spun at the

appropriate spin speed.

Do not exceed the maximum

load for the programme

selected.

– Close zips and fasten any

hooks next time.

If the problem occurs again,

dry garments with long zips

using "Timed drying - Warm

air".