- ページ 25

ドライヤー Miele TOUCHTRONIC T 9822のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Miele TOUCHTRONIC T 9822 36 ページ。 Miele clothes dryer user manual
Miele TOUCHTRONIC T 9822 にも：取扱説明書 (36 ページ), 取付説明書 (28 ページ)

ページを印刷する

Fault indicators

The "Check Filter/Vent" indicator lights.

Possible fault

The dryer does not work at

its optimum or not efficiently.

The lint filter might be

clogged with lint or

detergent residues.

The exhaust duct may be too

long. This is not a fault.

A program is canceled.

The "Check Filter/Vent" indicator flashes.

The fault cannot be detected

immediately.

The "Drying" indicator flashes.

The "Check Filter/Vent" and "Cooling down" indicators are lit.

The drum rotates for approx. 2 minutes.

This is a technical fault.

The program is canceled.

The "Drying", "Rotary Iron", "Hand Iron", and "Normal" indicators flash.

A new program start is not possible and the indicators will continue to

flash.

This is a technical fault.

The dryer is making a thumping or grinding sound.

The sound is caused by the

high airflow rate in the

ducting of the dryer. This is

not a fault.

Frequently asked questions

Solution

– Usually cleaning the lint filter fixes the problem.

If the problem persists, check all possibilities as

described under "The program runs too long or

stops".

– Open and close the door to turn off the

indicator.

With a long exhaust duct, program times and

energy consumption increase. See Installation

Instructions.

– Check the possible faults as described above.

– Open and close the door to turn off the

indicator.

– Start a program.

If the problem persists contact Technical Service.

Contact Technical Service.

– To determine if the noise is due to airflow,

temporarily remove the exhaust duct from the

machine. If the noise lessens, the ductwork is

the cause of the noise. Rigid or flexible

aluminum ducting is the best option for

reducing the noise.

If the problem persists please contact Technical

Service.