- ページ 45

デスクトップ HP 705のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HP 705 46 ページ。 2/4/9 - gb ultra wide se disk drive
HP 705 にも: ユーザーノート (3 ページ), ユーザーノート (2 ページ), ユーザーノート (2 ページ), ユーザーノート (2 ページ), ディスク・ドライブ・インストール・マニュアル (2 ページ), ユーザーノート (2 ページ), ユーザーノート (2 ページ)

HP 705 ユーザーマニュアル

Korean Notice

Power Cord Set Requirements

The monitor power supply is provided with Automatic Line
Switching (ALS). This feature allows the monitor to operate on
input voltages between 100-120V or 200-240V.
The power cord set (flexible cord or wall plug) received with the
monitor meets the requirements for use in the country where you
purchased the equipment.
If you need to obtain a power cord for a different country, you
should purchase a power cord that is approved for use in that
country.
The power cord must be rated for the product and for the voltage
and current marked on the product's electrical ratings label. The
voltage and current rating of the cord should be greater than the
voltage and current rating marked on the product. In addition, the
cross-sectional area of the wire must be a minimum of 0.75 mm²
or 18AWG, and the length of the cord must be between 6 feet
(1.8 m) and 12 feet (3.6 m). If you have questions about the type
of power cord to use, contact your HP authorized service
provider.
A power cord should be routed so that it is not likely to be walked
on or pinched by items placed upon it or against it. Particular
attention should be paid to the plug, electrical outlet, and the
point where the cord exits from the product.
User Guide
Agency Regulatory Notices
C–5