- ページ 3

デスクトップ HP 8100 - Elite Convertible Minitower PCのPDF ソフトウェア設定マニュアルをオンラインで閲覧またはダウンロードできます。HP 8100 - Elite Convertible Minitower PC 9 ページ。 Hp compaq convertible minitower business pc
HP 8100 - Elite Convertible Minitower PC にも: 仕様 (2 ページ), クイックセットアップとスタートマニュアル (21 ページ), サポート一覧 (34 ページ), 設定・構成マニュアル (48 ページ), 図解パーツ&サービスマップ (4 ページ)

HP 8100 - Elite Convertible Minitower PC ソフトウェア設定マニュアル

Minimum Hardware Requirements

Processor: Processor that supports Virtualization
Memory: 2GB RAM

Recommended Hardware Configuration

Processor: Processor that supports Virtualization
Memory: 2GB of RAM or Higher

System BIOS Requirements

The system BIOS must support virtualization technology in addition to the processor
having the feature for it to function.
By default, the HP system BIOS disables the virtualization support of processors.
Virtualization must be enabled for Windows XP Mode to function.

Virtualization Varieties

There are two kinds of Virtualization Technology:
Processor-based VT with VMM support
Chipset-based VT with directed I/O
The processor-based VT is common across both Intel and AMD processors. Intel VTx
and AMD-V both deal with virtualization at the processor level and are designed to
assist software virtualization.
The chipset-based VT is currently only available with higher-end Intel processors
and chipsets. Intel VTd (Directed I/O) is an extension of VTx and provides the
capability to control DMA accesses and direct them to specific domains which are
regions in physical memory. This will allow better performance for peripheral
devices that take advantage of the feature.
Intel VTd is offered in Intel vPro systems. VTd is not required for Microsoft Virtual PC
to execute, but it could improve performance.

HP System BIOS

HP systems (dc7xxx, dc5xxx, Elite 600x Pro, and others) that use an HP system
BIOS can access the virtualization option as follows.

VTx and AMD-V systems

Do the following to enable processor virtualization in VTx and AMD-V systems:
1. Turn on or restart the computer.
2. As soon as the computer is turned on, press F10 when the monitor light turns
green to enter Computer Setup. Press Enter to bypass the title screen, if
necessary.
3