スイッチ Allnet ALL0484WMPのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Allnet ALL0484WMP 2 ページ。 24 port 10/100 + 2 combo gigabit fx/sfp nway poe switch
ページを印刷する
ALL0484WMP
24 Port 10/100 + 2 Combo
Gigabit FX/SFP
Nway PoE Switch
User's Manual
FCC Warning
This device has been tested and found to
comply with limits for a Class B digital device,
pursuant to Part 2 and 15 of FCC Rules.
These
limits
are
designed
to
provide
reasonable
protection
against
harmful
interference when the equipment is operated
in
a
commercial
environment.
equipment generates and radiates radio
frequency energy and, if not installed and
used in accordance with the user's manual, it
may cause interference in which case users
will be required to correct interference at their
own expenses.
CE Warning
This is a Class B product.
In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
This switch provides 24 10/100Mbps NWAY
RJ-45 ports and can support 2 Combo Gigabit
Copper/SFP to uplink.. It was designed for
easy installation and high performance in an
environment where traffic is on the network
and
the
number
of
users
increases
continuously.
It consists of 24 PSE/PoE ports. That can
solve the limitation of the power outlet
location and offer the system designer a
flexible solution to locate the network device
everywhere.
The
rack-mount
size
was
specifically
designed for medium to large workgroups.
The switch can be installed where space is
limited; moreover it provides smooth network
migration and easy upgrade to network
capacity. The 19" size can be rack-mount on
19" cabinet.
Key Features
Provides 24 10/100Mbps Gigabit switching
ports and 2 Combo Gigabit Copper/SFP
24 PSE/PoE function ports
Supporting the power Max. 15.4 W for each
PSE/PoE port
19" rack-mount size
This
Non-blocking & Non-head-of-line blocking
full wire speed forwarding
Store-and-forward operation support
Embedded 2.75 Mb packet buffer
Provides 4K MAC address entry
Supports broadcast storm filtering
All ports provide Auto-Negotiation and Auto
-MDI/ MDI-X functions
Supports flow control: back pressure for
Half-duplex and IEEE 802.3x for Full-duplex
mode
Smart plug & play
Package Contents
Before you start to install this Switch, please
verify your package contain the following
items:
• One Rack-mount Switch
• Rack-mount Kit for Rack Installation
• One AC Power Cord
• One User's Manual
Note: If any of these items is found missing or
damaged, please contact your local supplier for
replacement.
Front Panel (LEDs)
LED Indicators of
24 Port + 2 Combo
Gigabit Copper/SFP PoE Switch
No. Of
LED
Status
Description
LED
Power
On
Power on
Power
On
Link 1000Mbps
1000M
2 (25~26)
off
Link 10/100Mbps
On
Link
26 (1~26)
Link/ ACT
Flashing Data activating
26 (1~26)
Port is linked to
On
24 (1~24)
Power Device
PoE
No Power Device
Off
24 (1~24)
is connected