- ページ 7

アンプ ALLNIC AUDIO H-6500のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。ALLNIC AUDIO H-6500 16 ページ。 Phono-stage preamplifier

CLEANING

Use only a soft, lint-free cloth dampened slightly with water only (NO cleaning fluids!) to

clean the faceplate and chassis of the H-6500 and its power supply.

You may use any good quality contact cleaner recommended for such applications to

clean the contacts from time to time, as you deem appropriate.

Like all audio products using tubes, the Allnic Audio H-6500 and its power supply need

to be placed on a solid stand in a location that provides good air circulation around both

the phono-stage and the power supply.

DO NOT cover the top of the H-6500 phono-stage or the ventilation slots in the

•

top of the power supply chassis.

DO NOT place the units on carpet or foam.

•

DO NOT subject the units to knocks and shocks as you move them around. This

•

advice is meant particularly for those who may want to place the H-6500 or its

power supply on after-market isolation feet or similar devices. Dropping one side

of either of the H-6500 units, or the whole of either unit, is not a good thing to do

and damage incurred by doing so will not be covered by warranty.

DO NOT place the units near a strong light or heat.

•

DO NOT place anything heavy on the units.

•

DO NOT allow rubber or vinyl materials to rest on either units' chassis for long

•

periods

of time. This could discolour the metal.

DO place the units on a shelf or stand that is stable and not subject to vibration

•

or sudden shock.

DO consider using a high-quality power cord and inter-connects, for both inputs

•

and outputs. The H-6500 is a highly sensitive piece of electronic designed for

neutrality and will output what you put into it.

DO try to place the H-6500 and its power supply away from major sources of RFI

•

and EMI; though well shielded, the H-6500 units will function best away from

large power transformers and other sources of such interference.