- ページ 5

ウォーターヒーター AquaStar 2400 ESのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。AquaStar 2400 ES 8 ページ。 Tankless water heater
AquaStar 2400 ES にも：取付説明書 (12 ページ)

Mounting instructions

B The water heater is approved for installation directly

on an outside wall. Secure the wall mounting bracket

provided with the water heater to a wall surface. See

Fig. 7.

B The installation method of the mounting bracket will

depend on what type of surface it's being mounted

on. Due to the varying varieties of building siding or

surfacing, the installer must decide on how best to

support and level the heater on an outside wall. It is

always recommended that horizontal or vertical

support boards or plywood sheathing (1/2"

minimum) first be attached to the wall surface. The

heater must also be kept level on the wall surface.

Fig. 7

Installation on wood siding

Warning: Do not mount heater directly

to vinyl siding. With vinyl siding, a 6' x 4'

area of the siding must first be removed

and then replaced with wood or other

non-plastic material. See Fig. 8.

6 720 608 835

Fig. 8

Installation on vinyl siding

B See Electrical connections section of the water

heater installation manual.

Warning: Confirm that the water

heater is appropriately grounded and

that the installation meets all applicable

electrical

codes

installations.

B Start and operate the water heater according to the

water heater installation manual. NOTE: Open the

control panel shield to access the controls of the

heater, see Fig. 6.

Mounting instructions

for

outdoor