- ページ 7
水システム AquaSure FORTITUDE PRO SeriesのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。AquaSure FORTITUDE PRO Series 12 ページ。 Whole house water treatment system
AquaSure FORTITUDE PRO Series にも： マニュアル (20 ページ)
ページを印刷する
- 1. Table of Contents
- 2. Inspection & Preparation
- 3. Be Familiar with the System before Installation
- 4. System Operation Parameter and Installation Checklist
- 5. Installing the System
- 6. STEP 1. Checking the Direction of Water Flow
- 7. STEP 2. Shutting off the Main Water Supply Valve
- 8. STEP 4. Attaching the Water Supply Pipe
- 9. STEP 5. Installing the Filter
- 10. STEP 6. System Startup
- 11. Limited Product Warranty
STEP 1.
Checking the direction of the water flow
1. Make the water flow to make sure they are going from left to right or right to left.
2. Reassemble the mounting bracket for the pleated sediment filter if the direction is
oppsite of where the mounting bracket is facing.
3. Make sure the flow fo the water goes into the opening that indicated "IN" on top of the
CAP and exit from the opening that indicated "OUT".
IN
STEP 2.
Shutting off the Main Water Supply Valve
1. Locate the main water supply valve of the house and turn off completely by turning the
shut-off handle clockwise.
2. Test to see if the water is completely shut off by turning on the faucet in the cold water
position. If the cold water cannot be shut off, please contact your local plumber to fix the
valve before begin installing the system.
IN
AQUASURE
FORTITUDE PRO SERIES
5