- ページ 5

掃除機 AQUASYSTEM APPQO600 -iのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AQUASYSTEM APPQO600 -i 12 ページ。 Air vacuum cleaner for open pail can

Use conditions

1. Used for JIS standard 20L open pail cans.

2. Compressor：5HP（3.75KW）

3. Supply air pressure：0.4～0.6MPa.

4. Acceptable viscosity：Under 3,000cP.

① Place the cleaner on a pail can so that the edge of the pail can fits

perfectly in the groove of rubber packing on the back of cleaner.

② Connect the air hose with the air valve closed.

③ When the air valve is opened, start to suck liquid / powder from the

tip nozzle.

④ In case of liquid collection, inhalation will stop automatically when

the can is full (about 17L).（*Except to S type model）

⑤ Close the air valve after use.

⑥ Remove the air hose.

⑦ Remove the cleaner from pail can.

*Necessary to use filter for powder inhalation.

【Attention】

① S type model does not include an oil stopper.

The inhalation does not stop even if the can is full. Please watch out

the volume of inside pail can. If you continue inhaling when the can

is full, the liquid will spurt out as mist from the ejector. If you need

the automatic stop function, purchase and install the optional oil

stopper.

② For powder inhalation, attach a filter surely. If the filter is not

attached, the sucked powder may spurt out from the ejector.

(Excluding S type model)In addition, the acoustic material of the

silencer may get wet or clogged, and leads to power depression.

③ Supply air pressure

Under 0.4MPa, the suction power is weak and it may not perform well.

Over 0.6MPa, the pail may be crushed.

Ensure to use with proper range of supply air pressure.