- ページ 6

デジタルカメラ Panasonic AK-SHB800のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic AK-SHB800 44 ページ。 8k multi purpose camera

Installation Instructions

Before installing

Take the drop prevention measure by attaching the drop prevention wire to the mounting screw hole.

Mounting the camera to the pan/tilt head

Prepare a commercially available drop prevention wire when mounting this unit to the pan/tilt head.

Mounting the camera to anything other than the pan/tilt head

Prepare the drop prevention wire and camera mounting fixture when attaching to anything other than the

pan/tilt head.

1 Drop prevention wire (optional): 2

Always use the drop prevention wire.

A drop prevention wire is available as an optional accessory. Use with as small slack as allowed by the

installation location or the installation method.

Secure wire diameter of 2 mm (3/32 inches) or more, length of 300 mm (11-13/16 inches) or less,

and strength of the mounting section of 2000 N or more when using a commercially available drop

prevention wire. Also, separately prepare the mounting screw matching the mounting specification.

Length of the wire (300 mm) (11-13/16 inches)

6.4 mm (1/4 inches)

4.5 mm (3/16 inches)

Camera side

f Wire length 300 mm (11-13/16 inches): Parts number (DVDW1001ZA)

2 Camera mounting screws (to be obtained by customer): 2

Size: 3/8-16 UNC

Consider the thickness of the camera mounting fixture for the length.

3 Installation side wire mounting screw (M6 or M4) (to be obtained by customer): 2

Use an anchor bolt at the installation location and secure the strength of ten times of the entire weight.

4 Flat washers (to be obtained by customer): 4 (for mounting the camera)

For 3/8 inch screw

5 Spring washers (to be obtained by customer): 4 (for mounting the camera)

For 3/8 inch screw

6 Camera mounting fixture (to be obtained by customer): 1

Prepare the fixture with material and shape that can withstand the entire weight of the camera and the

lens.

6.4 mm (1/4 inches)

4.5 mm (3/16 inches)

2 mm (3/32 inches)

Camera mounting fixture

6 to 8 mm (1/4 to 5/16 inches)

11 mm (7/16 inches)

Installation side