- ページ 43

デジタルカメラ Panasonic AK-UB300GのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic AK-UB300G 48 ページ。 Multi-purpose camera

4 <I/F> terminal

Connect the cable for the external synchronization signal and the control signal to the camera.

5 <LAN> terminal

Used to connect the LAN cable.

NOTE

t Use a shielded cable when connecting a cable to the <LAN> terminal.

6 <WARNING> lamp

This will illuminate in red when a problem occurs.

7 <IRIS> terminal

Used to connect the lens iris control cable.

8 <TALLY OUT> terminal

Outputs R tally and G tally.

9 <ZOOM/FOCUS> terminal

Used to connect the lens zoom/focus control cable.

10 <HD SDI OUT 1> terminal

This is the main line output terminal dedicated for HD SDI. Any character other than the camera ID

cannot be superimposed to the output.

NOTE

t Use a cable that is 5C-FB or above.

11 <G/L IN> terminal

This is the reference signal input terminal when applying external synchronization to the camera.

NOTE

t Supply a composite signal (black burst) or a tri-level SYNC as the input signal.

12 <HD SDI OUT 2> terminal

This is the monitor output terminal dedicated for HD SDI. Characters can be superimposed on the

output.

NOTE

t Use a cable that is 5C-FB or above.

13 <DC IN> lamp

This will illuminate in green when power is supplied to the camera.

14 <DC IN> terminal

This is an input terminal for the external DC power supply. Connects to the external DC power supply.

(DC 11 V to 17 V)

For details, refer to "Using external DC power supply" (page 18).

15 <UHD/HD SDI OUT 1>/<UHD/HD SDI OUT 2>/<UHD/HD SDI OUT 3>/<UHD/HD SDI OUT 4>

terminal

UHD and HD SDI main line output terminals. Characters cannot be superimposed on the output.

NOTE

t Use a cable that is 5C-FB or above.

Description of parts