- ページ 8

ヒートポンプ aquatherm AT600のPDF オーナー・オペレーション・マニュアルをオンラインで閲覧またはダウンロードできます。aquatherm AT600 12 ページ。 Swimming pool & spa heat pumps
aquatherm AT600 にも：オーナー・オペレーション・マニュアル (12 ページ), インストレーション・マニュアル (16 ページ)

Heat Pump Maintenance & Precautions

1. Air Flow & Service Access

Clearances

BASE

(CONCRETE OR

PREFAB)

1. Make sure the unit has a ﬁrm base. The heat pump will produce condensation

(water) while in operation. You will notice water coming from the bottom drain

ports when the unit is running. The condensation will increase as the outdoor

air humidity level increases.

Make sure the bottom drain ports do not become clogged with debris. Make

sure the run off water does not puddle inside the heater and does not undermine

the equipment base.

2. Keep the top air ﬂow discharge & air ﬂow intake area clear as shown here so

the air ﬂow through the heater is not restricted. Make sure the unit can "breathe"

well. The cooler discharge air from the top should not accumulate and be drawn

into the side air intake coils. Keep all plants and shrubs trimmed away from the

heater. Make sure the front is accessible for future service.

3. Do not allow lawn sprinklers to spray on the heater in any way. Keep sprin-

kler heads away from the heat pump to prevent corrosion and damage. Use a

deﬂector if needed.

4. If the unit is installed under a steep roof pitch or under a roof valley that has

no gutter, a gutter or diverter should be ﬁtted to prevent excessive water from

pouring through the unit.

AIR COIL

(on 3 Sides)

60"

FRONT

Page 8

BACK

AIR

12"

COIL

12"

FRONT

36"

12"