- ページ 3

メディアプレーヤー Aquatic AQ-BC-6BTのPDF ユーザー・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Aquatic AQ-BC-6BT 13 ページ。 Hide-away media player for bluetooth audio & mp3 devices
Aquatic AQ-BC-6BT にも：ユーザー・インストール・マニュアル (16 ページ), オーナーズマニュアル (11 ページ), ユーザー・インストール・マニュアル (14 ページ)

Getting Started

• AQ-BC-6BT BlueCube Media Player

• Wiring Harness (AQ-UNH-2)*

• Four (4) Stainless Steel Mounting Screws

*Retail packaged models only.

1.2 Connections (see Diagram 1.2.1)

1. 12-pin Watertight Harness

The 12-pin harness supplies power and ground connections to the BlueCube Media Player

and four (4) speaker channel output connections from the BlueCube Media Player (see

Wiring Diagram 1.3.1 on page 4).

Do not cut or modify the 12-pin harness on the BlueCube side or warranty will be void.

2. Auxiliary Outputs

Allows external amplifiers to be connected to power additional speakers.

3. Auxiliary Inputs

Allows an additional RCA input, from a standalone unit or another stereo source.

4. Remote 8-pin DIN Cable (x2)

Allows connection of the optional wired and wireless Remote Controls (sold separately).

5. 12V DC External Trigger (x2)

Allows for external lighting or relays to be triggered (3A max load). This feature is only

available when using the optional Remote Controls (sold separately).

6. Power On LED

When the BlueCube is powered On the LED will illuminate red.

7. Bluetooth Halo Aerial Connector

Connect the Bluetooth Halo Aerial Technology Antenna (AQ-BTANT-1) to the male SMA

connector. Do not apply excessive torque on the SMA connector (no more than 0.5N-m). Use

hands to tighten the connection (do not use a wrench). See section 1.5

8. Power Attenuation Wires

Allows the output level to be adjusted from a factory preset of -3dB to either -6dB, 0dB or

+6dB. See section 1.6 for further details.

Aquatic AV does not recommend the wired Remote Control for use in spa applications.

www.aquaticav.com

BlueCube Media Player AQ-BC-6BT

• User/Installation Manual

• Mounting Template*

• Bluetooth Antenna