- ページ 6

アンプ Aquatic AQ-AD600.4のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aquatic AQ-AD600.4 12 ページ。 4/3/2 channel waterproof amplifier

Installation

Before you drill or cut any holes, investigate your vessel's layout very carefully. Take special care

when you work near the gas tank, fuel lines, hydraulic lines and electrical wiring.

Never operate the amplifier when it is unmounted. Attach all audio system components securely

within the amplifier to prevent damage, especially in an accident.

Do not mount this amplifier so that wire connections are unprotected, in a pinched condition, in

contact with any metal surfaces in your marine vessel, or likely to be damaged by nearby objects.

Before making or breaking power connections in your system, disconnect the marine vessel bat-

tery. confirm that your head unit or other equipment is turned off while connecting the input jacks

and speaker terminals.

If you need to replace the power fuse, replace it only with a fuse identical to that supplied with

the amplifier. Using a fuse of a different type or rating may result in damage to your audio system

or your amplifier which is not covered by the manufacturer's warranty.

4.1 Input Wiring

The AQ-AD600.4 amplifier requires all four RCA inputs to be connected to provide correct

operation. When the amplifier is used in conjunction with a stereo source where only two RCA

outputs are available, please use RCA 'Y-connectors' to allow all four inputs to be connected.

Always use high-quality RCA cables for best audio performance.

www.aquaticav.com

Front

Rear

Stereo with 4x RCA Outputs (Front & Rear)

Left

Right

Stereo with 2x RCA Outputs (Left & Right)

4/3/2 Channel Waterproof Amplifier AQ-AD600.4