- ページ 6

リフティングシステム Aquatic Access IGAT-90のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Aquatic Access IGAT-90 18 ページ。 Pool lift

SOCKET INSTALLATION

Some states and localities require the

grounding of any metal object within five

feet of the pool edge, but this is sometimes

difficult in retrofit versus new installations.

Each socket has a grounding lug on the bottom

to connect to a grounding rod. Electrolysis

(staining of the stainless steel) may result if

the lift is not properly grounded. Consult

your local building codes for grounding

information.

The socket is located in the seat box and is

attached under the seat.

A 4" carbide core drill makes an excellent

clean hole in solid concrete. The center line of

the socket hole for your installation should be

_____" from the pool wall or ______" from

the edge of the deck. Drill the hole at least 8"

deep. It is necessary that the top of the socket

be flush with the deck's surface. With the

socket positioned in the hole with the notch facing the water, use a level to be certain the socket

is plumb and straight, and pour the anchor cement around the socket. Place a combination square

with level full depth into the socket to assure that the socket is vertical in all directions as the

cement sets (about 15 minutes). Allow the cement to cure overnight before installing the pool lift.

The pool lift is operated by city/household water pressure with no electricity needed.

Our system is designed for most efficient operation at approximately 55-65 PSI operating (open

flow) pressure to lift 400 lb., the maximum lift capacity. Less pressure is required to lift less

weight.

There are several ways to determine your water pressure. You can purchase a 0-100 PSI Water

Pressure Gauge from your local hardware store, or you can ask your water company or fire

department what the pressure is. Be aware that pressure gauges measure the static pressure of a

water line, which is higher than the open flow or operating pressure.