- ページ 5

リフティングシステム Aquatic Access IGMTのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Aquatic Access IGMT 18 ページ。

POOL LIFT MODEL IGMT

Install the socket for the IGMT pool lift at least

3' from any pool corner to insure that there is

enough room for the seat's rotation and for the

swimmer's feet to clear the edge of the pool.

Locate the socket at least 12" but less than 18"

from the edge of the pool.

SOCKET INSTALLATION IN CONCRETE

The IGMT socket is constructed of 2 1/2"

Sch. 40 stainless steel pipe, 6 1/2" long with

a welded-in base and a short grounding stud. A plastic liner inside the pipe ensures an easy

rotation for the lift.

held inside the socket, determine that the socket is absolutely vertical. If the socket for the lift is

not vertical, the installed lift will slowly

swing to the low side. Allow the cement

to cure overnight before installing the

pool lift.

In some pool environments, a socket

plate is a better installation choice. When

the IGMT pool lift is to be installed on

INSTALLATION

Using a 4" carbide core drill

(provided by the customer), drill

a hole in the concrete decking and

clear to a depth of 8". Fill the hole

around the socket with a good

grade of hydraulic cement. Take

care to prevent cement from falling

inside. Place the socket in the hole

with its top edge flush with the

surface of the deck. Using a level