- ページ 7

ステレオシステム Panasonic SA-AK770のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic SA-AK770 24 ページ。 Panasonic cd stereo system operating instructions

ページを印刷する

DEMO function

-7 STOP, –DEMO

Handling of the disc trays and discs

Not doing the following will cause damage to the unit.

Removing the mains plug

Press [y/I] to turn off the unit and remove the mains plug only after all the displays have disappeared.

Inserting a disc

• Place the disc correctly with the label facing up as shown in the diagram.

• Insert one disc into the tray.

NOTE on CDs

• This unit can access up to 99 tracks.

• Choose disc with this mark.

• This unit can play MP3 ﬁ les and CD-DA format audio

CD-R/RW that have been ﬁ nalised.

• It may not be able to play some CD-R/RW due to the condition of

the recording.

• Do not use irregularly shaped disc.

• Do not use disc with labels and stickers that are coming off or

with adhesive exuding from under labels and stickers.

• Do not attach extra labels or stickers on the disc.

• Do not write anything on the disc.

Note about using a DualDisc

The digital audio content side of a DualDisc does not meet the

technical speciﬁ cations of the Compact Disc Digital Audio (CD-DA)

format so playback may not be possible.

When the unit is ﬁ rst plugged in, a demonstration of its functions may be

shown on the display.

If the demo setting is off, you can show a demonstration by selecting "DEMO

ON".

Press and hold [-7 STOP, –DEMO] on the main unit.

The display changes each time you press and hold the button.

DEMO OFF (off)

DEMO ON (on)

While in standby mode, select "DEMO OFF" to reduce power consumption.

Tray caution

• Always press [0, OPEN/CLOSE] to insert or

remove a disc.

• Do not push or pull out the tray by hand as this

will cause an accident.

NOTE on MP3

• Files are treated as tracks and folders are treated as albums.

• This unit can access up to 999 tracks, 255 albums and 20

sessions.

• Disc must conform to ISO9660 level 1 or 2 (except for extended

formats).

• To play in a certain order, preﬁ x the folder and ﬁ le names with

3-digits numbers in the order you want to play them.

When "NOT MP3/ERROR1" appears on the display, an

unsupported MP3 format is being played. The unit will skip that

track and play the next one.

Limitations on MP3 play

• If you have recorded MP3 on the same disc as CD-DA, only the

format recorded in the ﬁ rst session can be played.

• Some MP3s may not be played due to the condition of the disc or

recording.

• Recordings will not necessarily be played in the order you

recorded them.

RQT8043