ページを印刷する
biomorph
Frame, materials and weights:
W
D
H
V (speed)
F
= Max. Load on tabletop:
MAX
Operation:
Voltage:
Consumption:
ASSEMBLY INSTRUCTIONS - In concert with frame instructions QUESTIONS? CALL US AT 888 302 3375
1. Attach V-Foot to bottom of post,
upside down.
4. Slip power supply bracket into slot
in left bracket.
7. Place keyboard surface ontop of
foam packing from frame box, attach
keyboard mech using pilot holes. Push
into slide under main surface, attach
plastic end-cap, rotating keyboard
surface if necessary for access.
Ground Support Equipment (US) Ltd. DBA biomorph, 11 Broadway, New York, NY 10004 Tel: 888 302 3375 fax:888-652-7137 [email protected]
xo
®
Steel, silver - Weight metal frame ~ 30 kg
60-160 cm
50-100 cm
68 – 120 cm
~28 mm/sek.
120 kg
Rocker switches
220-230 VAC / 50Hz or 110-100 VAC / 60Hz
80 Watt
2. Turn upright, attach left support bracket.
Run cord through hole.
5 Place power supply into bracket and
run power cord through hole in support
bracket.
www.biomorph.com
2
EL
3. Attach right support bracket.
6. If dual surface version, place large
surface ontop of foam from frame
box, and mount keyboard mechanism
slide with included screws. (This step
not necessary for single surface
version) Then flip over and mount
onto frame using screws provided
and pilot holes.
8. Attach control switch to large surface using
pilot holes. Connect cables as per diagram, use
guides to organize cables under surface
.
OPERATION: Press either up or down arrow
and desk will move in the up or down direction.
-
-