- ページ 15

カメラアクセサリー Olympus PT-044のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Olympus PT-044 35 ページ。 Underwater case for digital camera fe-360; x-875; c-570

2. Advance Check of the Case

This Case has been the subject of thorough quality control for the parts

during the manufacturing process and thorough function inspections

during the assembly. In addition, a water pressure test is performed with

a water pressure tester for all products to confirm that the performance

conforms to the specifications.

However, depending on the carrying and storage conditions, the

maintenance status, etc., the waterproof function may be damaged.

Before diving, always perform the following advance test and the final test

after installation of the camera.

1 Before installing the digital camera in the Case, immerse the empty Case to

the intended water depth to confirm that there is no water leakage.

2 Main causes of water leakage are as follows.

• The O-ring has not been installed.

• A part of the O-ring or the entire O-ring is outside the specified

groove.

• O-ring damage, cracks, deterioration or deformation

• Sand, fibers, hair or other foreign matter sticking to the O-ring, the

O-ring groove or the O-ring contact surface on the front lid

• Damage to the O-ring groove or the O-ring contact surface on the

front lid

• Catching of the strap, silica gel, etc. when closing the Case

• Throwing the Case from a boat into the water, jumping with the

Case into the water, or other sudden application of strong forces

onto the Case. When entering the water, hand the Case over gently

or avoid impacts in other ways.

Perform the test after the above causes have been eliminated.

CAUTION:

• The most suitable method for checking water leakage is to immerse the

Case to the intended water depth. When this is difficult, water leakage also

can be checked at a shallow depth with no water pressure. Do not feel that

this is troublesome, but perform this test.

• If a leak is detected in normal handling during testing, do not use the Case

and contact Olympus.

EN 15