バイクアクセサリー Alphamount APCH01BのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Alphamount APCH01B 2 ページ。 Kid bicycle helmets

Fig. C

5. (Refer to Fig. D)After adjusting the strap to proper length, put the

helmet on your head. The helmet must sit ﬁrmly and level on your head.

To lower the front of the helmet to cover your forehead, tighten the

front chin strap and loosen the rear strap. To raise the front, loosen the

front chin strap and tighten the rear strap.

To check for proper tension, put on the helmet and fasten the buckle.

Open your mouth. You should feel the strap pulling against your chin.

Then attempt to pull the helmet oﬀ the front or rear. If the helmet

comes oﬀ, increase strap tension and examine if thick enough pads are

being used. The helmet should not be able to roll forward or backward

excessively. It should not be possible to remove the helmet without

unfastening the buckle.

Fig. D

Level

6. Final Check

6-1.The important thing to remember is that the helmet should be ﬁtted

snugly. If you can tilt it forward or backward you need to tighten the

strap.The straps should be positioned that they do not cover the ears or

eyes and that the buckle is away from the jaw when correctly ﬁtted.

6-2. It is important to make sure the helmet to ﬁt snugly on your head

and must be fastened to provide maximum protection.

6-3. All adjustments should be checked each time the helmet is worn,

making sure it ﬁts snugly at all times.

Kid Bicycle Helmets Instruction Manual

Model: APCH01B/APCH01A

Thank you for choosing this Alphamount product! At Alphamount we strive to

provide you with the best quality products and services in the industry.

Should you have any issues, please don't hesitate to contact at

V1.0