- ページ 6

ベビーモニター Axvue E660のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Axvue E660 12 ページ。 With 2.4" lcd screen and night vision

Setup & use (continued)

Step 1: Place the monitors in the rooms from which you want to monitor your baby (ie., living room

or bedroom). Plug the monitor AC adapters into the AC adapter jacks and other ends into

standard electrical outlets.

Step 2: Press and hold POWER/MENU bu�on for 5-seconds to power up un�l the AXVUE logo or

video appears on screen.

Step 3: For audio and no video, press the VIDEO ON/OFF bu�on top of the unit.

Step 4: To turn the monitor oﬀ completely, press and hold the POWER/MENU bu�on for 5-seconds.

Before using the monitor, charge the ba�ery for 6-8 hours.

Step 1: Charge the ba�ery for 4 hours at least, before using the monitor in portable mode.

Step 2: Make sure the monitor adapter is plugged into the monitor, camera adapter is plugged into

the camera, as they are shown on the body.

Step 3: The ba�ery life can be up to 6-hours if charged overnight.

Ba�ery life will be weaken if recharging constantly. Charge the ba�ery a�er the indicator is shown.

Remove ba�ery if long �me of non-use, or exhausted.

The monitor and the camera are paired prior to the shipment. If the monitor

and camera are found not paired for some reason, follow steps below:

Step 1: Make sure the monitor is at the same area as the camera.

Step 2: Keep the camera powered oﬀ.

Step 3: Press Power/VIDEO

OK/Menu bu�on

Right/Zoom In

which is show as below . Select ADD CAM icon

an availabe number and press OK/menu

wireless connec�ng icon is shown.

Press 5 second

to power on.

Step 4: Power on the camera within 8 seconds.

Step 5: Wait 3 seconds, the red LED will stop ﬂashing once paired successfully, and video will appear.

PAGE 5

TO USE PLUGGED-IN

TO USE PORTABLE / BATTERY MODE

TO PAIR MONITOR AND CAMERA ( ADD A CAMERA )

bu�on for 5 second to power on the monitor. Then press

, highlight camera op�on

bu�on, press the OK/menu

OFF

by using Left/Brightness

bu�on to enter the camera op�ons menu

, press OK/menu

bu�on to start pairing, the red LED will ﬂash and

bu�on to camera list, select

Red LED will ﬂash