- ページ 18

プリンター Epson AcuLaser C8500のPDF クイック・リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Epson AcuLaser C8500 21 ページ。 Epson aculaser c8500: quick start
Epson AcuLaser C8500 にも：開梱マニュアル (20 ページ)

ページを印刷する

Messages

Description

The printer has insufficient memory

to execute the current task.

Printouts are not output to the

specified output tray but to another

tray due to a printing restriction.

: The selected paper source is

indicated.

: The selected paper size is

indicated.

There is no paper in the specified

paper source (XXX). Load paper of

the indicated size (YYY) into the

paper source.

: The selected paper source is

indicated.

: The selected paper size is

indicated.

The paper loaded in the specified

paper source (XXX) does not match

the required paper size (YYY).

Replace the loaded paper with the

correct size paper and press

Continue.

If you press Continue without

replacing the paper, the printer will

print on the loaded paper even

though it does not match the

required size.

Messages

Description

The installed photoconductor unit

has a problem. Turn off the printer,

remove the photoconductor unit

and install a new photoconductor

unit.

The required time to process the

print data exceeds the print engine

speed because the current page is

too complex. Press the Continue

button to resume printing. If this

message appears again, turn on

Config Menu.

If you continue to receive this

message when printing a particular

page, try simplifying the page by

limiting the number of graphics or

reducing the number and size of

fonts.

The writing of PostScript 3

commands on the optional Hard

Disk Drive is no longer possible as

the amount of space allocated to

PostScript 3 on the Hard Disk Drive is

used up.

in the SelecType