- ページ 5

リモコン Archer Components TRAIL D1XのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Archer Components TRAIL D1X 8 ページ。

Step 2:

Install MFR Pod

1. Determine the appropriate location for the pod.

a. Make sure you have access to the MAB and can access the Shift Button

Port in the mounting location.

b. Verify there is sufficient length of shift button cable for the mounting location.

c. If mounting on the handlebar or stem, turn your bars to make sure the MFR

Pod does not hit the bike frame.

d. If mounting off the handlebar or stem, make sure to provide sufficient slack

in the shift button cable to allow for full range of motion of the handlebars

when turning.

2. Use an appropriately sized O-ring to affix the pod to a secure location on

your bike.

Note: The optional double-sided adhesive

strip can be used to provide a more

secure mounting, however the adhesive

should be used in conjunction

with the O-ring, not by itself.