- ページ 25

プリンター Epson C11CA27201 - WorkForce 40 Color Inkjet PrinterのPDF クイックマニュアルをオンラインで閲覧またはダウンロードできます。Epson C11CA27201 - WorkForce 40 Color Inkjet Printer 36 ページ。 Wi-fi color printer
Epson C11CA27201 - WorkForce 40 Color Inkjet Printer にも：重要なセットアップ情報 (3 ページ), クイックマニュアル (9 ページ), ネットワーク・インストレーション・マニュアル (36 ページ), 仕様 (2 ページ)

Check the table below for explanations of the printing status lights. For

information about the network status lights, see the Network Installation Guide

or the on-screen Epson Information Center.

Light status

flashing slowly

(no other lights are on)

flashing fast

flashing slowly

off

flashing fast

off

Problem and solution

The printer is turned on.

The printer is in sleep mode. Press any button except

the

power button to wake it up.

The printer cover is open. Close the printer cover.

Paper is out or multiple pages have fed. Load or reload

paper in the sheet feeder or press the

eject excess sheets.

Paper is jammed. Carefully remove the jammed paper.

One or more cartridges have low ink. You can continue

printing until a cartridge needs replacement. Check the

cartridge status to determine which cartridges are

affected.

An ink cartridge is expended, incorrectly installed, or

cannot be used with the printer.

If an ink cartridge is likely to be expended or is not

compatible, you must replace the cartridge to be able to

print.

If you just replaced a cartridge and the light is still on, the

cartridge is not installed correctly. Press the

move the cartridges to the replacement position. Open

the ink cartridge cover, press down on all the installed

cartridges, and close the ink cartridge cover. Then press

the

button to continue.

Parts inside the printer are at the end of their service life.

Contact Epson for help (see page 28).

There is a problem with the printer. Turn it off, wait a

few moments, and turn it back on again. If the error is

not resolved, contact Epson for help (see page 28).

button to

Checking the Status Lights

button to