- ページ 13

扇風機 ayas AGF-120E-2K-MのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ayas AGF-120E-2K-M 18 ページ。 Aluminum casing centrifugal fan

Electrical Wiring Diagram

THINGS TO BE CONSIDERED WHEN MAKING THE ELECTRICAL CONNECTION

1. The electrical connection of the product should only be made by authorized persons.

2. Make sure that the product is connected to the installation in accordance with the

electrical values written on the label.

3. Before connecting the electrical cables, definitely cut off the electricity from the

source.

4. Make sure that the main power supply is turned off when connecting the power

cables, even if the product is turned off.

5. After checking whether the electrical connection information (voltage, power,

frequency, etc.) specified on the product match with the place where the installation

will be made, the product should be assembled.

6. For safety reasons, the grounding terminal on the terminal must be connected to the

building ground line.

7. The product wiring must be as in the electrical wiring diagram.

8. It must be connected to the fixed installation in accordance with the installation rules,

together with a switch with contact separation in all poles.

When you run your product for the first time;

• Before connecting the electrical cables, always cut off the electricity from the source.

Do not operate the product without making sure that the electrical connections of the

product are safe and as shown in the electrical wiring diagram.

• Make sure all equipment is properly connected.

• Make sure that the grounding connections are as shown in the electrical connection

diagram.

• Make sure that the cable and electrical connection box are closed correctly and

watertight.

• Make sure that the air outlet direction is the same as the direction shown on the

labels on the product. The blades should rotate in the correct direction.

• Make sure that there are no objects obstructing the air flow, otherwise these objects

will be thrown out by the fan.

• There should be no vibration during the operation of the product, and no internal

rubbing or knocking sounds caused by the rotation of the fan.

• In case the product comes into contact with water or any electrical safety device is

burned, the electrical connection must be immediately disconnected from the mains.

When the product is to be operated again, the entire installation should be checked

again.

• If you encounter any problems, inform the authorized persons.

 When you start to use the product continuously, in case of any malfunction, the

technical service must be contacted in order to determine the type of malfunction

and rectify the malfunction.

Never try to intervene yourself.