- ページ 37

プロジェクター Sharp Notevision XG-C465X-LのPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Sharp Notevision XG-C465X-L 46 ページ。 3-lcd conference / classroom data-video projectors
Sharp Notevision XG-C465X-L にも：仕様書 (2 ページ)

ページを印刷する

Carrying out Network Ping

Test

(ADVANCED[5]Network Ping Test)

It is possible to confirm that a network connection

between the projector and a computer etc. is work-

ing normally.

advanced>5

Ping Test IP addr :192.168.150.1

Please Enter

:192.168.150.152

(change)

—> 192.168.150.152

32 bytes from 192.168.150.152: icmp_seq = 1, time = 0 ms

32 bytes from 192.168.150.152: icmp_seq = 2, time = 0 ms

32 bytes from 192.168.150.152: icmp_seq = 3, time = 0 ms

32 bytes from 192.168.150.152: icmp_seq = 4, time = 0 ms

1 1 1 1 1 Enter "5" and press the "Enter" key.

2 2 2 2 2 Enter IP address of device to be tested and

press the "Enter" key.

Display entered IP address (*1).

Display test result (*2).

Note

• If the "Enter" key is pressed without entering an

IP address, the Ping Test IP address used previ-

ously is entered.

• If there is a fault with the connection, "Error: No

answer" is displayed after a 5 second retry. In this

case, please confirm the settings for the projector

and the computer, and contact your network ad-

ministrator.

Setting up the Projector Using RS-232C or Telnet

Setting of Accept IP Ad-

dress

Addr(1) - [8]Accept IP Addr(3))

It is possible to improve security of the projector by

allowing connection from only a prescribed IP ad-

dress. It is possible to set up to three IP addresses

allowing connection to the projector.

advanced>6

Accept IP Addr(1) : 0.0.0.0

Please Enter

(change)

1 1 1 1 1 Enter "6", "7" or "8" and press the "Enter" key.

2 2 2 2 2 Enter numerical value and press the "Enter" key.

Display set numerical value (*).

• To invalidate the Accept IP Address being cur-

rently set, enter "0.0.0.0".

• If there is one or more Accept IP Addr being set,

no connections are allowed from IP addresses

that are not yet set. They can be cancelled using

[9]Accept All IP Addr.

Accepting All IP Addresses

(ADVANCED[9]Accept All IP Addr)

Removes IP addresses set with "Accept IP Addr".

advanced>9

Accept All IP Addresses(y/n)? y

1 1 1 1 1 Enter "9" and press the "Enter" key.

2 2 2 2 2 Enter "y" and press the "Enter" key.

• At the point in time where "y" was entered, the

numerical values for Accept IP Addr(1)-(3) are

reset to "0.0.0.0".

• If "n" is entered, setting is not altered.

(ADVANCED[6]Accept IP

: 192.168.150.152

—> 192.168.150.152

Note

-37