- ページ 16

モニター Samsung 400MXN - SyncMaster - 40" LCD Flat Panel DisplayのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Samsung 400MXN - SyncMaster - 40" LCD Flat Panel Display 22 ページ。 Quick guide (korean)
Samsung 400MXN - SyncMaster - 40" LCD Flat Panel Display にも： (クイック・スタート・ガイド (22 ページ), (フランス語）クイック・スタート・ガイド (22 ページ), (韓国語）クイック・スタート・マニュアル (21 ページ)

Troubleshooting

Note

Check the following items yourself before calling for assistance. Contact a Service Center for problems

that you cannot solve by yourself.

Self-Test Feature Check

Turn off both your computer and the LCD Display.

Unplug the video cable from the back of the computer.

Turn on the LCD Display.

The figure shown below ("Check Signal Cable") appears on a black background when the LCD

Display is working normally even though no video signal is detected: While in the Self-Test mode,

the LED power indicator remains green and the figure moves around on the screen.

Turn off your LCD Display and reconnect the video cable; then turn on both your computer and

the LCD Display

If your LCD Display screen remains blank after using the previous procedure, check your video con-

troller and computer system; your LCD Display is functioning properly.

You can even view the screen at a resolution of 1360(1920) x 768(1080). However, you will receive

the following message for a minute; You can choose to change the screen resolution or stay in the

current mode during that time. And if the resolution is more than 85Hz, you will see the black screen

because the LCD Display does not support over 85Hz.

Note

Refer to Specifications > Preset Timing Modes for the resolutions or frequencies supported by the

LCD Display.

1) Maintaining the LCD Display Case.

Clean with a soft cloth after disconnecting the power cord.