- ページ 6

スイッチ Siemens Sitrans LVL200のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens Sitrans LVL200 16 ページ。 Vibrating switches

Siemens Sitrans LVL200 取扱説明書
Scope of delivery
Area of application
Packaging
Transport
Transport inspection
Storage
Storage and transport
temperature
6
3

Product description

3.1 Configuration
The scope of delivery encompasses:
Electronics module for SITRANS LVL200
Documentation
– This operating instructions manual
3.2

Principle of operation

The electronics module is suitable for replacement in SITRANS
LVL200 vibrating level switches.
3.3

Packaging, transport and storage

Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
based on ISO 4180.
The packaging of standard instruments consists of environment-
friendly, recyclable cardboard. For special versions, PE foam or PE
foil is also used. Dispose of the packaging material via specialised
recycling companies.
Transport must be carried out in due consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or con-
cealed defects must be appropriately dealt with.
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
Not in the open
Dry and dust free
Not exposed to corrosive media
Protected against solar radiation
Avoiding mechanical shock and vibration
Storage and transport temperature see chapter "Supplement -
Technical data - Ambient conditions"
Relative humidity 20 ... 85 %
Electronics module - Operating Instructions
7ML19985LS31