- ページ 27

食器洗い機 Siemens SN23E831TIのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens SN23E831TI 40 ページ。

ページを印刷する

Fault table

Fault

"Check water supply"

display h lights up.

Display "Check water

supply" h flashes.

Refill indicator for salt `

flashes.

Cause

Supply hose kinked.

Tap turned off.

Tap jammed or calcified.

Filter in the water supply blocked. Switch off the appliance and pull out the

Filters 1R are soiled or

blocked.

Waste-water hose kinked or

blocked.

Siphon connection still sealed.

Waste water pump blocked or

cover on the waste water pump is

not locked in position.

A technical fault has probably

occurred.

Heating element calcified or

soiled.

Fault, what to do?

Remedial action

Install supply hose without kinks.

Turn the tap on.

Flow rate must be min. 10 l/min. when

water supply is open.

mains plug. Turn off the tap. Unscrew water

connection.

Clean filter in the supply hose. Screw water

connection on again. Check for leaks.

Reconnect power supply. Switch on the

appliance.

Clean filters.

(see "Cleaning and maintenance").

Install hose without kinks, remove any

residue.

Check connection to siphon and open if

required.

Lock cover correctly.

(See "Waste water pump")

Switch off appliances with the ON/OFF

switch (. After a short time restart the

appliance.

If the problem recurs, turn off the tap, pull

out the mains plug and call customer

service.

Clean appliance with dishwasher cleaning

agent or descaler. Operate the dishwasher

with water softening system and check the

setting (see chapter "Water softening

system/Special salt").