- ページ 28

食器洗い機 Siemens SN23E832TIのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens SN23E832TI 42 ページ。

ページを印刷する

Fault, what to do?

Fault table

Fault

"Check water supply"

display )" lights up.

Error code :

is lit.

Error code :

is lit.

Fault code :

is lit.

Fault code :

is lit.

Fault code :

is lit.

Error code :

is lit.

Error code :

is lit.

Cause

Supply hose kinked.

Tap turned off.

Tap jammed or calcified.

Filter in the water supply blocked. Switch off the appliance and pull out

Intake opening (on right inside of

appliance) covered by utensils.

Heating element calcified or

soiled.

Water protection system

activated.

Constant water inflow.

Filters 1R are soiled or

blocked.

Waste water hose

is blocked or kinked.

Siphon connection still sealed.

Cover on the waste water pump

loose.

Remedial action

Install supply hose without kinks.

Turn on the tap.

Flow rate must be min. 10 l/min.

when water supply is open.

the mains plug. Turn off the tap. Unscrew

water connection.

Clean filter in the supply hose. Screw water

connection on again. Check for leaks.

Reconnect power supply. Switch on

the appliance.

Arrange utensils so that the intake opening

is not obstructed.

Clean appliance with dishwasher cleaning

agent or descaler. Operate the dishwasher

with water softening system and check the

setting (see chapter "Water softening

system/Special salt").

Turn off tap.

Call customer service and mention the fault

code.

Clean filters.

(See Cleaning and maintenance)

Install hose without kinks, remove any

residue.

Check connection to siphon and open if

required.

Lock cover correctly.

(See Waste water pump)