- ページ 14

ホブ Siemens EH6..ME3 SERIESのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens EH6..ME3 SERIES 20 ページ。
Siemens EH6..ME3 SERIES にも：取扱説明書 (20 ページ)

ページを印刷する

The Powerboost Function

The Powerboost function can be used to heat food more

quickly than using the power level

Restrictions when using

This function is available for all hotplates, provided that the

other zone of the same group is not operating (see image).

Otherwise, in the visual display of the selected hotplate

will flash; then the power level will automatically set itself to

*URXS

Time programming function

This function may be used in two different ways:

to automatically switch off a hotplate.

■

as a timer.

■

Turn off a hotplate automatically

Enter the cooking time for the desired hotplate. The hotplate

turns off automatically once the time has elapsed.

Programming

Select the desired power level.

Press the

symbol. The

lights up in the time program function display. To select

‹‹

another hotplate, press the

indicator for the desired hotplate lights up.

Select the required cooking time in the programming panel.

The possible previous setting is, from left to right 1,2, 3, etc.,

up to 10 minutes. Within the next 10 seconds, continue past

the options in the programming panel until reaching the

desired time.

After a few seconds the cooking time begins to count down.

*URXS

indicator of the hotplate lights up.

symbol several times until the

To activate

Select the power level

Press the programming panel located above the

The function has been activated.

To turn off

›

and

Press the programming panel located above the

The Powerboost function has been deactivated.

Note: In certain circumstances, the Powerboost function may

turn off automatically in order to protect the electronic

components inside the hob.

Automatic programming

If the previous setting from 1 to 5 is pressed in the

programming panel, the cooking time is reduced by one

minute, if it is held down the time is automatically reduced to

one minute.

If the previous setting from 6 to 10 is pressed in the

programming panel , the cooking time is increased by one

minute, if it is held down the time is automatically increased to

99 minutes.

Once the time has elapsed

The hotplate switches off. An audible signal sounds and

appears in the time program function display for 10 seconds.

The

indicator lights up. Pressing the

indicators and stops the signal.

Changing or cancelling the time

Press the

symbol several times until the desired

lights up. Change the cooking time in the programming panel,

or set to

‹‹

Automatically switch off a hotplate with the cooking sensor

function

When cooking using the sensor system, the programmed

cooking time begins to count down once the hotplate reaches

the desired temperature.

Automatically switch off a hotplate with the deep-frying

function

When cooking using the deep-frying function, the programmed

cooking time begins to count down once the selected hotplate

reaches the desired temperature.

Notes

If a cooking time has been programmed in several zones, it

■

can be set to display all time values. To do this, press the

symbol several times until the

hotplate lights up.

Cooking times of up to 99 minutes can be programmed.

■

@›

symbol turns off the

indicator for the required

symbol.

@›

symbol.

‹‹

indicator