- ページ 12
プリンター Ricoh PRIPORT SILVER-VのPDF テクニカル・ニュースをオンラインで閲覧またはダウンロードできます。Ricoh PRIPORT SILVER-V 16 ページ。
Model:
PRIPORT SILVER/SILVER-V/SILVER-V2/SV2P
PRINTER DRIVER OPERATION
If the Windows test page does not print or does not look right, check the printer driver
operation using these steps:
1. Select the Details tab in the Properties menu of the printer driver.
2. Change the port connection to "File:"
3. Click the Apply button. Then select the General tab and click the Print test page button.
4. Set the file name (e.g. test.prn). Then set the disk/directory location. Save the file.
5. Click "YES" when the message pops up and asks whether the test page printed correctly.
6. Access the MS-DOS prompt or Command Prompt.
7. Check that the engine and controller are ready for printing. Then execute the following
command at the MS-DOS prompt or Command Prompt. "copy /b test.prn lpt1"
NOTE: 1) Always input "/b" after the Copy command.
2) The above example applies if the file name saved in the step 4 is
"test.prn".
3) If the controller is connected to the second PC port, replace "lpt1"
with "lpt2".
8. Input "exit". Then exit from the MS-DOS prompt or command prompt.
9. If the test page has printed correctly, change the printer driver port from "File:" back to its
previous setting.
SERVICE TABLE
There are no SP modes for the printer controller unit.
Technical Bulletin
No:
Date:
30-Sep-03
PAGE: 12/15
015
R-C231-