- ページ 6

プリンター Ricoh PRO 907EXのPDF トラブルシューティングマニュアルをオンラインで閲覧またはダウンロードできます。Ricoh PRO 907EX 23 ページ。 Sap printing
Ricoh PRO 907EX にも：クイック・スタート・マニュアル (19 ページ), インストレーション・マニュアル (16 ページ), 仕様 (12 ページ), マニュアル (12 ページ)

Cleaning the Automatic Document Feeder [ADF]

If the exposure glass or ADF belt is dirty, copy clarity may be reduced. Clean these parts if they are dirty.

To clean the ADF, clean 1 and 2 as shown in this diagram with a soft damp cloth. Do not use wet rags or spray any liquids in the

feeder. Keep loose objects away from feeder as these will cause damage and machine failure.

Important

Do not use chemical cleaners or organic solvents, such as thinner or benzene. If such substances get inside the machine or melt

plastic parts, machine failure will occur.

Do not clean parts other than those explicitly specified in the copier manual. Other parts should ONLY be cleaned by your service

representative.

Always use caution and care when cleaning, handling or using the document feeder.

Originals Not Suitable for the Document Feeder

•Stapled, clipped, perforated, or torn originals

•Curled, folded, or creased originals

•Pasted or sticky originals, such as translucent paper

•Coated originals, such as thermal fax paper, foil, art paper, or carbon paper

•Originals with indexes, tags, perforated lines, or other projecting parts

•OHP transparencies

•Thick originals, such as postcards, and flimsy originals of low stiffness

Contact your Service Representative

for issues regarding the document

feeder if you are unsure what to do

to avoid damage or injury.