- ページ 5

プリンター Ricoh Pro L4130のPDF ケア＆メンテナンス・マニュアルをオンラインで閲覧またはダウンロードできます。Ricoh Pro L4130 29 ページ。 Wide format color digital imaging system
Ricoh Pro L4130 にも：安全上のご注意 (17 ページ), 仕様 (4 ページ), 印刷マニュアル (8 ページ)

ページを印刷する

Press the

• The carriage moves to the maintenance position.

• If the carriage is not covered by the ink cap for a long period of

time, the nozzle face of the head may get dry and clogged,

resulting in white lines being left in the printed image.

• The buzzer sounds periodically while the carriage is out of the

capping station. The buzzer sounds at shorter interval when the

print heater temperature is high.

Open the right maintenance cover cover then

remove the wiper.

• Pull out the wiper by holding the protrusions at its both ends.

Put the wiper that you used for one day into a provided case or solvent-resistance-

covered-container (glass, earthenware, etc.) and pour Cleaning Fluid.

• Time to immerse the wiper shall be for 1 to 24 hours.

• If you leave the wiper immersed in Cleaning Fluid too long, the wiper may be deformed.

• Dispose the Cleaning Fluid for soaking the wiper if it gets dirty. (As a guide, replace it in a

week). Regarding disposal of unused Cleaning Fluid, please ask Industrial waste disposer

and pursuant to the regulations of your district.

• For case for immersing the wiper, please use provided case or solvent-resistance-covered-

container. In case that you want to immerse the wiper by using your resin case, please

make sure to test whether there are no problems such as case deformation before you try.

Take out the wiper and remove ink blot etc. with a

Kimwipe®.

• Wipe off well so that any lint etc. do not remain on the top

edge of the wiper film.

key.

At the start of immersion

At the end of immersion

Carriage

Projection