- ページ 10

プリンター Ricoh SP 150SUwのPDF Wi-Fi接続マニュアルをオンラインで閲覧またはダウンロードできます。Ricoh SP 150SUw 16 ページ。
Ricoh SP 150SUw にも: セットアップマニュアル (2 ページ)

Ricoh SP 150SUw Wi-Fi接続マニュアル
• If the setting is modified, the authentication password entry
screen appears after [Apply] is clicked.
Enter the administrator password (default password is
"888888". The password can be set from [Modify Password]
in the [Settings] menu.), and click [Login].
Restart the printer to apply the modified setting to the printer.
7. Click the wireless network icon on the task bar on
the computer.
Available access points are searched for, and found access
points are displayed in the list.

4. Connecting with a Smart Device via a Wi-Fi Router

You can connect your smart devices (smartphone, iPhone, tablet,
etc.) with the printer via a Wi-Fi router (wireless access point).
Install the "RICOH Printer" application to your smart device first to
use the printer.
• Some of the illustrations or descriptions in this manual may vary
due to changes for improvement in this application or smart
devices.

For Android or iOS

Setting an Access Point using "RICOH
Printer"
When you set an access point (Wi-Fi router) for the printer for the
first time, perform the following procedure from step 1.
If the Wi-Fi setting has been set up and the connection between
the printer and smart device is established, perform the procedure
from step 10 to change the access point to use.
8. Click the printer in the list.
9. Enter the password for Soft AP, and click [Connect].
• You can find the password for Soft AP in [Passphrase] under
[Soft AP] on the System Settings sheet.
You can now print files on the computer via Wi-Fi network by
selecting "Print" from the "File" menu of applications or use the
functions of "RICOH Printer".
1. Download the application from the RICOH official
website at:
http://www.ricoh.com/printers/sp150/support/
gateway/
2. Press and hold the
printer.
3. Press and hold the
longer.
The power indicator turns blue and the Wi-Fi function is ena-
bled on the printer.
4. Press and hold the
longer.
The power indicator flashes twice and the Soft AP function is
enabled on the printer.
5. Set papers on the printer.
6. Press the
power key three times successively.
The System Settings are printed out from the printer.
7. Confirm that the Soft AP function is enabled on the
System Settings sheet.
• [Enable] or [Disable] is displayed for [Soft AP] under the
[Wireless Network] category.
If the Soft AP is not enabled, perform the procedure from 1
again to enable the function.
8. Enable the Wi-Fi function on the smart device.
Available access points are searched for, and found access
points are displayed in the list.
8
power key to turn on the
power key for 1 second or
power key for 1 second or