- ページ 13

ネットワーク・ルーター Cisco 3620のPDF コンフィギュレーション・ノートをオンラインで閲覧またはダウンロードできます。Cisco 3620 18 ページ。 Rack-mount and wall-mount
Cisco 3620 にも：オーナーズマニュアル (17 ページ), クイック・スタート・マニュアル (37 ページ)

ページを印刷する

Wall-Mounting the Cisco 3620 Router

This section explains how to wall-mount the Cisco 3620 router.

Attaching Wall-Mounting Brackets to the Cisco 3620 Router

To install the router on a wall, ﬁrst attach the brackets on each side of the chassis as shown in

Figure 24, using the special plastic washers and slotted hex-head screws. Place the washers so that

the narrow shoulder faces the router chassis.

Note

router. All other rack- and wall-mount brackets are attached to the router using Phillips-head screws,

without washers.

Figure 24

ACTI VE

READ Y

Mounting the Cisco 3620 Router on the Wall

After fastening the brackets to the chassis, follow this procedure to mount it on the wall (refer to

Figure 25):

Step 1

Step 2

Caution

Step 3

The hex-head screws and plastic washers are used only for wall-mounting the Cisco 3620

Cisco 3620 Wall-Mount Bracket Attachment

PCM CIA

Note: The second bracket attaches to the other side of the chassis.

Using the brackets as a pattern, mark and drill holes on the board where you will fasten

the router. Do not attach the router to the board yet.

Locate the wall studs where you plan to attach the router.

The router must be fastened securely to two studs.

Drill wall-mount screw locations through the plywood board and studs.

Plan to mount the router so that the front and rear of the chassis are perpendicular

Note

to the ﬂoor, with the front upward and at eye level, so you can read the LEDs.

Cisco 3600 Series Rack-Mount and Wall-Mount Configuration Note

Wall-Mounting the Router