- ページ 37

無線アクセスポイント Cisco 500 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco 500 Series 46 ページ。 Stackable managed switches
Cisco 500 Series にも： 安全情報マニュアル (42 ページ), マニュアル (4 ページ), クイック・スタート・ガイド (13 ページ), クイック・スタート・マニュアル (21 ページ), データシート (5 ページ), ユーザーマニュアル (4 ページ), ユーザーマニュアル (6 ページ), マニュアル (40 ページ), 管理マニュアル (48 ページ), マニュアル (24 ページ), トラブルシューティングとメンテナンス (15 ページ), クイック・リファレンス・マニュアル (7 ページ), クイック・スタート・マニュアル (25 ページ)

ページを印刷する
Cisco 500 Series ユーザーマニュアル
Troubleshooting
• Check that your desired call device detects your headset. Go to Cisco.com for help with your specific

Other People Can't Hear You on Your Cisco Headset 560 Series

Problem
You cannot be heard when using your Cisco Headset 560 Series.
Solutions
• Check to make sure your microphone is not muted. Press Mute on your controller or wireless headset
• Make sure that the microphone boom has been lowered. For optimal sound, the headset microphone
• Check that your device is detecting your headset. Go to Cisco.com for help with your specific Cisco
• Make sure that your base is properly plugged into your preferred call device. Ensure that the connection
• Make sure that you don't take your headset too far from the base.
• If you use your headset with a multibase, make sure that your desired call source is selected on the base.
Related Topics
Your Headset and Base Won't Pair
Problem
Your headset is seated in the wireless base but they have not paired. The headset and battery indicator LEDs
on the base flash rapidly. It should take no longer than 10–12 seconds for the headset and base to pair.
Solution
Power cycle the headset.
Cisco device.
to mute and unmute your microphone. When you are muted on a call, Mute on your inline controller or
call indicator LED on your base shows solid red.
should be no further than 1 in (2.5 cm) from your mouth.
device.
to and from the base is secure.
Cisco Headset 560
Series, on page 4
Other People Can't Hear You on Your Cisco Headset 560 Series
Cisco Headset 500 Series User Guide
31