- ページ 10

ウェザーステーション ACU-RITE 01608のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ACU-RITE 01608 20 ページ。 Rain gauge station

Rain Gauge Installation

• To ensure accurate rain measurement, the rain gauge MUST be placed on a

flat, level surface.

• Ensure the rain gauge is not placed in a low spot that could become flooded

or in an area where there are obstructions above it.

1. Separate the rain gauge cover from the rain gauge base.

2. Locate the two holes on the rain gauge base.

3. Fasten the rain gauge base to a sturdy surface, like a deck railing or a fence

post, with screws (included) using hand tools. (Power tools may slip during

installation, causing damage to the rain gauge.)

Setup is Complete

The rain gauge and wireless sensor will now synchronize with the display. It may

take a few minutes for synchronization to complete. Please refer to the

troubleshooting section of this manual if anything appears to be functioning

improperly.

SQUEEZE

SQUEEZE TABS TO OPEN

INSTALL 2 SCREWS USING

HAND TOOLS ONLY.

THEN RE-ATTACH UPPER CASING