- ページ 25

会議システム Cisco Codec C SeriesのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Cisco Codec C Series 35 ページ。 Telepresence conference system
Cisco Codec C Series にも：スタートマニュアル (41 ページ), ユーザーマニュアル (44 ページ), スタートマニュアル (32 ページ), スタートマニュアル (42 ページ), スタートマニュアル (46 ページ)

ページを印刷する

Cisco TelePresence Systems

GettinG started Guide

Table of contents

Introduction

remote control and on-screen menu

Setting the system/codec password

You need a username and password to sign in to the web

and command line interfaces of your system.

The video conference system is delivered with a default

user account with username

admin

and no password set.

This user has full access rights to the system.

NOTE: We strongly recommend that you set a password for

the

admin

user to restrict access to system configuration.

Make sure to keep a copy of the password in a safe

You have to contact your Cisco representative if you have

forgotten the password.

The system/codec password cannot be set using the

remote control and on‑screen menu. This has to be done

via the web interface.

1. Sign in to the web interface with your username and

current password.

If a password is not currently set, use a blank

password.

2. Go to the

Maintenance

tab and select

3. Enter the

Current

password, the

New

repeat the new password in the appropriate input fields.

The password format is a string with 0–64 characters.

4. Click

Change

password.

User interfaces

Setting the Administrator Settings menu

password

When starting up the system for the first time the

Administrator Settings menu password is not set.

NOTE: We strongly recommend that you define a password

to protect the Administrator Settings menu, since these

settings affect the behavior of the video conference system.

place.

1. Go to

Home > Settings > Administrator Settings > Set

password.

On the remote control, press the # key to toggle

between lower or upper case characters and numbers:

abc/ABC/123.

2. Enter the menu password. The password you enter is

hidden; each character is replaced with a star (*).

3. Select Save to save the changes, or Cancel to leave

without saving.

Current

4. Press

Home

Change

Password.

password, and

Configuration

Appendices

(

)

to exit.