- ページ 19
会議システム Cisco TelePresence Profile 65のPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Cisco TelePresence Profile 65 42 ページ。 Telepresence ex, mx, quick set c20, codec c, sx20 quick set, profile series video systems
Cisco TelePresence Profile 65 にも： ユーザーマニュアル (44 ページ), スタートマニュアル (46 ページ)
ページを印刷する
Cisco TelePresence Systems
GettinG started Guide
Table of contents
Introduction
remote control and on-screen menu
Provisioning set-up
(when using a provisioning system)
If in doubt for any of the parameters below, contact your
provisioning system provider.
See the Administrator guide for your product to find more
information about the provisioning settings.
Select provisioning infrastructure
1. Go to
Home > Settings > Administrator settings >
Advanced configuration > Provisioning > Mode
select a provisioning infrastructure:
• TMS – Cisco TelePresence Management System
• VCS – Cisco Video Communication Server
(only available for EX and MX series)
• Callway – Cisco TelePresence Callway
• CUCM – Cisco Unified Communications Manager
If you select Off, all configurations must be set manually
on the video system.
Always save the new value when you change a
setting
• Drop down list selection: Navigate to the correct
value and press the
OK
( )
key to save, or press
the left arrow key
to leave without saving.
• Text entry in an input field: Enter the text, navigate
to
Ok/Save
to save the change, or navigate to
Cancel
to leave without saving; then press the
OK
( ) key
to confirm.
Back to task overview
D14639.06 Video Systems Getting Started Guide (TC5.1) | 2012 FEBRUARY | © 2011-2012 Cisco Systems, Inc. All rights reserved.
User interfaces
Configuration
Configuration
Set the required provisioning parameters
Which parameters to set depend on which infrastructure was selected.
TMS
1. Go to
Home > Settings > Administrator settings
> Advanced configuration > Provisioning >
ExternalManager.
2. Enter the IP address or DNS name of the Cisco TMS
and
server in the
Address
3. Enter the
Path
to the provisioning service in the
corresponding input
field.
4. It may be required to authenticate the video system
with Cisco TMS. If so, go back to
> Administrator settings > Advanced configuration >
Provisioning,
and enter
respective input fields.
VCS (for EX and MX Series only)
1. Go to
Home > Settings > Administrator settings
> Advanced configuration > Provisioning >
ExternalManager.
2. Enter the IP address or DNS name of the Cisco VCS in
the
Address
input field.
3. Enter the SIP
Domain
corresponding input
field.
4. It may be required to authenticate the video system
with Cisco VCS. If so, go back to
> Administrator settings > Advanced configuration >
Provisioning,
and enter
respective input fields.
Have a look at the
Cisco VCS provisioning for MX and
EX Series
appendix for more information about VCS
provisioning.
Appendices
input field.
1)
Home > Settings
LoginName
and
Password
in the
for the Cisco VCS in the
Home > Settings
LoginName
and
Password
in the
Callway
Upon ordering the Cisco TelePresence Callway service, you
have received a
Video number
and an
Activation
Please send an e-mail to
have a video phone number and an activation code.
1. Go to
Home > Settings > Administrator settings >
Advanced configuration > Provisioning
2. Enter the Video number in the
LoginName
3. Enter the Activation code in the
Password
CUCM
1. Go to
Home > Settings > Administrator settings
> Advanced configuration > Provisioning >
ExternalManager.
2. Enter the IP address or DNS name of the UCM
provisioning server in the
Address
input field
You can find more details about setting up Cisco UCM
provisioning in the Administering TC endpoints on CUCM
guide.
1)
The DHCP server can be set up to provide the External Manager
address automatically (Option 242 for TMS; Option 150 for UCM).
Any input in the input field will override the setting provided by
DHCP.
19
code.
if you don't
input
field.
input
field.
.
1)
www.cisco.com