- ページ 5

ネットワーク・ハードウェア Cisco PIX 525のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco PIX 525 30 ページ。 Security appliance
Cisco PIX 525 にも：データシート (13 ページ)

ページを印刷する

Chapter 6

PIX 525

Connect the network cables to the expansion interface ports. (The inside, outside, or perimeter network

Step 6

connections can be made to any available interface port on the PIX 525.) The first expansion port

number, at the top left, is interface 2. Starting from that port and going from left to right and top to

bottom, the next port is interface 3, the next is interface 4, and so on. Refer to the

Licenses" section on page 6-5

If you have a second PIX security appliance to use as a failover unit, install the failover feature and cable

Step 7

as described in the

Note

When you are ready to start the PIX 525, power on the unit from the switch at the rear of the unit.

Step 8

PIX 525 Feature Licenses

If you have the PIX-525-UR unrestricted feature license, the following options are available:

•

For information on upgrading feature licenses or downloading the latest software versions, refer to the

configuration guide online

http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/config.html

This section includes the following topics:

•

78-15170-02

"Installing Failover" section on page

Do not power on the standby failover unit until the primary unit is configured.

If you have a second PIX 525 to use as a failover unit, install the failover feature and cable as

described in the

"Installing Failover" section on page

If needed, install the PIX security appliance syslog server as described on the logging command

page in the

command reference

http://cisco.com/en/US/products/sw/secursw/ps2120/prod_command_reference_list.html

If you need to install an optional circuit board, refer to the

PIX 525" section on page

If you need to install additional memory, refer to the

page

6-12.

at:

VPN Accelerator Card, page 6-6

VPN Accelerator Card+, page 6-6

for information on how to configure the ports.

online at:

6-15.

Cisco PIX Security Appliance Hardware Installation Guide

PIX 525 Feature Licenses

"PIX 525 Feature

6-6.

"Installing a Circuit Board in the

"Installing a Memory Upgrade" section on

6-5