- ページ 12
ネットワーク・ハードウェア Cisco SCE8000 GBEのPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Cisco SCE8000 GBE 18 ページ。 10gbe platform
Cisco SCE8000 GBE にも： クイック・スタート・マニュアル (25 ページ), 取り外しと交換の手順 (36 ページ), インストール (21 ページ)
ページを印刷する
The Cisco SCE8000 Optical Bypass
Table 2-9
LEDs
Status
Optical Bypass Module Specifications
Fiber Cable Type
The fiber cable type within the Optical Bypass Module area as follows:
•
•
Maximum optical path (fiber length of two ports) is 600m.
Switching Time
Switching time is measured from trigger to stable 90% optical output.
•
•
Fan Assembly
The system fan assembly, located in the chassis, provides cooling air for the installed modules
(Figure
If the air temperature exceeds a preset threshold, the environmental monitor displays warning messages.
Cisco SCE8000 10GBE Installation and Configuration Guide
2-12
Optical Bypass Module LEDs
Description
The Status LED indicates the operational status of the optical bypass
module, as follows:
•
•
OPB-SCE8K-MM: 50 um core.
OPB-SCE8K-SM: SMF-28
Typical switching time: 3 ms
Maximal switching time: 10ms
2-9). Sensors on the fan assembly and within the system monitor the internal air temperatures.
Chapter 2
Green — Bypass module has been de-activated (traffic flows through the
Cisco SCE8000 platform)
Off — Bypass module is active (traffic does not flow through the Cisco
SCE8000 platform)
Introduction to the Cisco SCE8000 10GBE Platform
OL-16478-05