- ページ 13
ネットワーク・ハードウェア Cisco TelePresence MCU 4200 SeriesのPDF はじめにをオンラインで閲覧またはダウンロードできます。Cisco TelePresence MCU 4200 Series 18 ページ。 Accessing conferences
Cisco TelePresence MCU 4200 Series にも： スタートマニュアル (15 ページ)
ページを印刷する
Calling participants in to a conference
To call participants in to a conference:
1
In the web interface of the MCU, go to
active conference.
2
On the
Participants
endpoint.
3
In the
Address
where there is no H.323 gatekeeper or SIP registrar, type the IP address,
host name, or SIP URI of an accessible endpoint on your network
if you are using an H.323 gatekeeper, enter the number registered with the
gatekeeper for the required endpoint
if you are using a SIP registrar, enter the number registered with the SIP
registrar for the required endpoint
4
Leave the other fields as their default values and click
automatically connects to the endpoint.
5
If the endpoint is not configured to automatically answer calls, accept the call on
the endpoint.
Calling in to a conference
Participants can call in to conferences in either one of two ways:
if you have given the conference a numeric identifier and you are using an H.323
gatekeeper or SIP registrar, tell participants to dial the numeric identifier from
their endpoint to join that conference
participants can dial the IP address of the MCU to access the auto attendant of
the MCU. Participants will see a menu of available conferences on their video
screen and will hear instructions
tab, click
Add participant
field:
and click on the name of an
Conferences
to call out to an H.323 or SIP
Call endpoint
Using the MCU
. The MCU
13