- ページ 15
ネットワーク・ハードウェア Cisco UBR7246VXRのPDF ハードウェアのインストールをオンラインで閲覧またはダウンロードできます。Cisco UBR7246VXR 25 ページ。 Universal broadband router
Cisco UBR7246VXR にも： クイック・スタート・マニュアル (27 ページ), ユーザーマニュアル (7 ページ), インストレーション・マニュアル (28 ページ)
ページを印刷する
Figure 10
AC and DC Power Supplies
1
2
3
4
1
Cable retention clip
2
Captive installation screw
3
AC receptacle
4
Power switch
5
Handle
AC Power Supplies
Step 1
At the rear of the router, ensure that the power switch on the power supply is in the OFF (0) position.
Step 2
Slide the cable-retention clip to the left, away from the AC receptacle, and plug in the power cable.
Step 3
Secure the cable in the power supply AC receptacle by sliding the cable-retention clip to the right until it fits around
the connector. The cable-retention clip provides strain relief for the AC power cable.
Tip
For additional AC power cable strain relief, secure the cable to the power supply handle by inserting a nylon cable tie
through the hole in the handle and around the cable.
Step 4
Plug the AC power supply cable into the AC power source.
Step 5
Repeat Step 1 through Step 4 for the second power supply (if present).
Figure 11
Connecting AC-Input Power
Power
receptacle
Captive
installation
screw
AC power cable
6
5
Cable-retention clip
Power
switch
Handle
10 9
8
7
6
Captive installation screw
7
M5 grounding lugs
8
Strain relief studs
9
Power receptacle
10 Power switch
15