- ページ 28

サーバー Cisco C880 M4のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Cisco C880 M4 48 ページ。 System event log collection
Cisco C880 M4 にも：サービス補足マニュアル (27 ページ), ハードウェア・インストール・マニュアル (23 ページ), クイック・スタート・マニュアル (2 ページ), ファームウェア・アップデート・マニュアル (5 ページ)

6.2. Mains Connection

Figure 18: Inserting the power cables

The storage subsystem is supplied with the mains voltage via the two delivered power cables.

Plug the end of the power cables marked (1) into the port of the power supply

unit on the rear panel of the storage subsystem.

Plug the end of the power cables marked (2) into a safety socket on the rack mains socket strip.

CAUTION!

Ensure that at least one power supply unit of the storage subsystem and one power supply unit of

the server attached to the subsystem are connected with the same phase.

In order to set up the mains connection of the storage subsystem with phase redundancy, the two

power supply units must be connected to two different phases or to two different circuits of the rack

installation.

Ensure that the safety sockets used to connect the storage subsystem are protected sufficiently by

a 16 A or 15 A (USA) automatic cutout.

Operating Manual

6.2Mains Connection