- ページ 48

サーバー Cisco S695FのPDF ハードウェア・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco S695F 50 ページ。 Web security appliance
Cisco S695F にも：スタートマニュアル (18 ページ), マニュアル (24 ページ)

ページを印刷する

Remove and Replace a Power Supply

Warning

Step 1

Remove the power supply that you are replacing or the blank panel from an empty bay:

a) Do one of the following actions:

• If the chassis has one power supply, shut down and remove power from the chassis. See

Down, on page 37

• If the chassis has two power supplies, you do not have to shut down the chassis.

b) Remove the power cord from the power supply that you are replacing.

c) Grasp the power supply handle while pinching the release lever toward the handle.

d) Pull the power supply out of the bay.

Cisco Web Security Appliance S195, S395, S695, and S695F Hardware Installation Guide

Statement 1024 Ground Conductor

This equipment must be grounded. To reduce the risk of electric shock, never defeat the ground conductor

or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate

electrical inspection authority or an electrician if you are uncertain that suitable grounding is available.

Statement 1030 Equipment Installation

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Statement 1073 No User-Serviceable Parts

There are no serviceable parts inside. To avoid risk of electric shock, do not open.

Statement 1074 Comply with Local and National Electrical Codes

To reduce risk of electric shock or fire, installation of the equipment must comply with local and national

electrical codes.

for the procedure.

Maintenance and Upgrades

Power Button Shut