- ページ 24

サーバー Cisco SNS-3495 seriesのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco SNS-3495 series 36 ページ。 Sns-3400 series
Cisco SNS-3495 series にも：設置マニュアル (19 ページ), トラブルシューティングマニュアル (8 ページ)

ページを印刷する

Install the Cisco SNS 3415 or 3495 Appliance in a Rack

Warning: This unit is intended for installation in restricted access areas. A restricted access area can be

Warning

accessed only through the use of a special tool, lock and key, or other means of security.

Statement 1017

Install the Cisco SNS 3415 or 3495 Appliance in a Rack

This section describes how to install the Cisco SNS 3415 or Cisco SNS 3495 appliance in a rack.

Install the Side Rails

To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions

Warning

to ensure that the system remains stable. The following guidelines are provided to ensure your safety:

This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest

component at the bottom of the rack.

If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit

in the rack.

Statement 1006

Step 1

Open the front securing latch (see the following figure). The end of the slide-rail assembly marked "FRONT" has a

spring-loaded securing latch that must be open before you can insert the mounting pegs into the rack-post holes.

a) On the rear side of the securing-latch assembly, hold open the clip marked "PULL."

b) Slide the spring-loaded securing latch away from the mounting pegs.

Cisco SNS-3400 Series Appliance Hardware Installation Guide

Install the Cisco SNS 3415 and Cisco SNS 3495 Hardware Appliances