- ページ 35

サーバー Cisco SNS-3595-K9のPDF ソフトウェアのインストールをオンラインで閲覧またはダウンロードできます。Cisco SNS-3595-K9 38 ページ。
Cisco SNS-3595-K9 にも：インストレーション・マニュアル (36 ページ)

ページを印刷する

Install Cisco ISE Software on Cisco SNS Appliances

Prompt

Username

Password

When you create a password for the administrator during installation or after installation in the CLI, do not use

Note

the $ character in your password, unless it is the last character of the password. If it is the first or one of the

subsequent characters, the password is accepted, but cannot be used to log in to the CLI.

If you inadvertently create such a password, reset your password by logging into the console and using the CLI

command, or by getting an ISE CD or ISO file. Instructions for using an ISO file to reset the password are

explained in the following document:

identity-services-engine/200568-ISE-Password-Recovery-Mechanisms.html

After the setup program is run, the system reboots automatically.

Now, you can log in to Cisco ISE using the username and password that was configured during the setup process.

Verify the Installation Process

To verify that you have correctly completed the installation process:

Step 1

When the system reboots, at the login prompt enter the username you configured during setup, and press Enter.

Step 2

At password prompt, enter the password you configured during setup, and press Enter.

Step 3

Verify that the application has been installed properly by entering the show application command, and press Enter.

The console displays:

Cisco Identity Services Engine

---------------------------------------

Version: 2.0.1.116

Build Date: Mon Jan 11 19:31:27 2016

Install Date: Tue Jan 12 14:35:24 2016

Description

Identifies the administrative username

used for CLI access to the Cisco ISE

system. If you choose not to use the

default (admin), you must create a new

username. The username must be three

to eight characters in length and

comprise of valid alphanumeric

characters (A–Z, a–z, or 0–9).

Identifies the administrative password

that is used for CLI access to the Cisco

ISE system. You must create this

password in order to continue because

there is no default password. The

password must be a minimum of six

characters in length and include at least

one lowercase letter (a–z), one

uppercase letter (A–Z), and one

numeral (0–9).

https://www.cisco.com/c/en/us/support/docs/security/

Install Cisco ISE Software on Cisco SNS Appliances

Verify the Installation Process

Example

admin (default)

MyIseYPass2