サーバー Cisco UCS B200 M4のPDF アップグレードマニュアルをオンラインで閲覧またはダウンロードできます。Cisco UCS B200 M4 9 ページ。 For e5-2600 v4 series cpus
Cisco UCS B200 M4 にも： インストールとサービスノート (30 ページ), インストールとサービスノート (46 ページ), 整備マニュアル (24 ページ)
ページを印刷する
Cisco UCS B200 M4 Server Upgrade Guide for
E5-2600 v4 Series CPUs
First Published: June 20, 2016
Introduction
This document describes the process for upgrading a Cisco UCS B200 M4 Blade Server that is currently
running E5-2600 v3 CPUs to use Intel E5-2600 v4 Series CPUs. Minimum software support and upgrade and
downgrade scenarios are described, including the following:
•
•
•
Failure to follow the procedures in this guide when upgrading an existing server to use Intel E5-2600 v4
Caution
Series CPUs might result in a non-bootable server.
Minimum Software and Firmware Requirements
The minimum software and firmware versions that are required for the Cisco UCS B200 M4 blade server to
support Intel E5-2600 v4 Series CPUs are listed in the following table.
Table 1: Software and Firmware Minimum Version Requirements
Software or Firmware
Cisco UCS Manager
Server CIMC
Server BIOS
Upgrade Scenario: UCS Manager and the BIOS Software are Earlier Than the Minimum Supported
Release Version, and the Server has Intel E5-2600 v3 Series CPUs
Upgrade Scenario: UCS Manager and the BIOS Software are at the Minimum Supported Release Version,
and the Server has Intel E5-2600 v3 Series CPUs
Upgrade Scenario: UCS Manager Software is the Minimum Supported Release Version, the Server has
Intel E5-2600 v4 Series CPUs, and the BIOS Software is Earlier Than the Minimum Supported Release
Version
Minimum Version
Release 3.1(1) or 2.2(7) (See the following Note for information about
additional supported versions.)
Release 3.1(1) or 2.2(7)
Release 3.1(1) or 2.2(7)
Cisco UCS B200 M4 Server Upgrade Guide for E5-2600 v4 Series CPUs
1