- ページ 21

サーバー Cisco UCS B250 M1のPDF インストールとサービスノートをオンラインで閲覧またはダウンロードできます。Cisco UCS B250 M1 34 ページ。 Extended memory blade server

S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m

Remove the heat sink (N20-BHTS2 for M1 models, N20-BHTS4 for M2 models). See

Step 2

2. Remove the old thermal compound from the bottom of the heat sink using the cleaning kit

(UCSX-HSCK) available from Cisco. Follow the instructions on the two bottles of cleaning solvent.

Unhook the socket latch. See

Step 3

Step 4

Open the socket latch. See

Step 5

Remove the CPU or socket protective cover. See

Figure 10

Installing a CPU or Heat Sink

Before installing a new CPU in a server, verify the following:

•

To install a CPU or heat sink, follow these steps:

Place the CPU on the base with the notches aligned to the pins on the base. See

Step 1

OL-22474-03

Figure

Removing the Heat Sink and Accessing the CPU Socket

The CPU is supported for that model server.

A BIOS is available that supports the CPU/DIMM and server combination.

The service profile for this server in UCS Manager will recognize and allow the new CPU. This is

especially important if you have been using a single processor and install a second processor.

Cisco UCS B250 Extended Memory Blade Server Installation and Service Note

Working Inside the Extended Memory Blade Server

10, callout 3.

10, callout 4.

Figure

10, callout 5.

Figure

10, callout

Figure

11, callout 1.